Full automatic punching machine In the production process, temperature control plays a vital role in the normal operation of the machine and product quality.

Introduction Auto punching machine The principle, method and importance of temperature control.

1、 Temperature is the influence of fully automatic Punching machine One of the important parameters of performance and manufacturing process.

The full-automatic punching machine will generate a lot of friction heat in the working process,

Especially when the machine operates at a fast speed and has a large working load, the friction heat will be more obvious.

If the temperature is not effectively controlled, it will lead to overheating and thermal deformation of the machine, which will affect the stability and accuracy of the machine, and may even lead to machine failure.

2、 The temperature control of automatic punching machine is mainly divided into two aspects: cooling of mechanical structure and temperature monitoring and regulation of electrical control.

1. The cooling of mechanical structure is one of the important means of temperature control of automatic punching machine.

The cooling of mechanical structure is mainly realized through the cooling water circulation system.

In the design of full-automatic punching machine, a set of cooling water system is usually set up to draw cooling water from the cooling water tank through a water pump,

After cooling by the cooler, the cooling water is sprayed to the friction part of the machine through the nozzle, and the machine is cooled by the principle of heat absorption and evaporation of water.

The temperature control of cooling water needs to be monitored in real time by sensors,

If the temperature is too high, it is necessary to adjust the supply and spraying amount of cooling water in time to keep the temperature within the normal range.

2. The temperature monitoring and adjustment of electrical control is also an important means of temperature control of automatic punching machine.

The temperature monitoring of electrical control is mainly realized by temperature sensors,

Install the sensor on the parts that are easy to generate heat during the operation of the machine, such as motors, electrical components, etc.

The sensor will sense the temperature change in real time and feedback the temperature signal to the control system.

The control system will adjust the working state of electrical equipment according to the temperature signal,

For example, adjust the speed of the motor, start and stop electrical components to achieve temperature control and regulation.

3、 In the production of automatic punching machine, the importance of temperature control is self-evident.

1. Temperature has a great influence on the stability and accuracy of the machine.

The mechanism and parts of the full-automatic punching machine are ideal for working within a certain temperature range,

Too high or too low temperature will affect the performance of the machine, or even lead to machine failure.

2. Temperature also has a great impact on product quality.

The full-automatic punching machine usually needs to process metal plates in the production process,

If the temperature is too high, the metal plate will deform and become soft, which cannot meet the requirements of the product.

In addition, temperature control can also extend the service life of the machine and reduce the mechanical damage caused by high or low temperature.

4、 In actual operation, the temperature control of automatic punching machine needs to rely on scientific and reliable temperature detection technology and accurate temperature control system.

In terms of temperature control, we can use professional temperature sensors, such as thermocouples, infrared thermometers, etc., to monitor temperature changes in real time.

In terms of temperature regulation, PID control algorithm can be used. According to the measured temperature signal and the set target temperature,

Adjust the corresponding control parameters to keep the temperature within the set range.

In a word, the temperature control of the full-automatic punching machine in the production process mainly includes the cooling of the mechanical structure and the temperature monitoring and regulation of the electrical control. Temperature control has an important impact on the stability, accuracy and product quality of the machine. In terms of temperature control, reliable temperature sensors and accurate temperature control systems are needed to achieve accurate monitoring and regulation of temperature. Only do a good job in temperature control of the automatic punching machine can ensure the normal operation of the machine and the excellent production of products.