CNC punching machine The main function of the piercing head is to puncture and punch the position where stainless steel and other materials need to be punched, so its position must be adjusted accurately. During debugging, it should be noted that when the center of the pendulum is at a low point within the measurement range, the tip of the piercing head should be at the horizontal position of the rotation axis of the pendulum.

Remove the sample splint with the weight placed on it, adjust the pointer to the place with a large value, and then turn the NC Punching machine Place it at the position where the test starts and press the release button to let the pendulum start to swing. Normally, the pointer at this time should point to the zero point position. If not, use the zero point adjusting screw on the pendulum for debugging. If it is necessary to replace heavy lumps with different weights during use, the zero point shall be re adjusted.

When debugging the pointer friction force of the numerical control punching machine, first place the pointer at the zero point, place it at the test position, and then let the pendulum swing by releasing the button. This means that the pointer should not exceed the zero point. If it does, then inject lubricating oil into the pointer bearing or release the spring pressure of the pointer to debug it.

The purpose of debugging the professional CNC punching machine is to ensure that the punching machine can have better punching quality and precision, so we carefully debug the punching machine that has just been purchased or replaced with more important parts, so as to obtain the ideal punching effect. At the same time, Accurate debugging is also an effective protection for the service life of the NC punching machine itself.