Full automatic punching machine It is a machine specially used for machining holes in metal workpieces.

With its advantages of accuracy and speed Auto punching machine It is widely used in parts processing in metallurgy, machinery, electric power, aviation, military industry and other fields.

However, in the long-term use process, there are often some common failures and problems.

This article will analyze these problems and provide some solutions.

Question 1. Automatic Punching machine Decline in accuracy

The accuracy of the automatic punching machine is one of the keys to successful processing.

However, as the use time increases, the accuracy of the automatic punching machine may decline.

This may be caused by improper use of the machine, wear, loose machine parts, etc.

The solution is to maintain the automatic punching machine, including regularly replacing worn parts, lubricating machines, and loose bolts,

To ensure that all parts of the machine are running well.

Problem 2: The automatic punching machine is noisy

Noise is a common problem of automatic punching machine, which often affects the working environment and reduces the working efficiency.

This may be caused by improper machine environment, damaged machine parts, etc.

The solution is to correctly install and maintain the machine, and ensure that the machine is fully lubricated and adjusted during use to reduce noise pollution.

Problem 3: The hole size deviation of the automatic punching machine is large

The hole size deviation processed by the automatic punching machine exceeds the specified error range,

This is often due to the looseness or damage of some parts of the machine, or the abnormality of the processing workpiece or the mismatch of materials.

The solution is to check the parts of the machine and fix or replace the damaged parts,

At the same time, ensure that the type and specification of workpiece materials to be processed are correct, and correctly select the type and size of holes to be processed to avoid hole errors.

Problem 4. Operation error of automatic punching machine

Operation errors often lead to safety problems such as machine falling, fixed arm damage, etc.

This kind of situation often leads to misoperation due to failure to pay attention to the operation safety of the machine.

The solution is to improve the operation safety awareness and training of workers,

The user shall be familiar with the working principle, precautions, troubleshooting and maintenance procedures of the full-automatic punching machine,

Ensure that the automatic punching machine meets the operation safety requirements during operation, and avoid misoperation.

Problem 5: The electrical components of the automatic punching machine are faulty

Electrical fault is one of the common faults of automatic punching machine, which may be caused by battery failure, circuit short circuit, relay damage and other reasons.

Repairing electrical faults usually requires professional technicians.

The electrical part of the machine needs to be checked regularly. Once a problem is found, it should be stopped, and professional technicians should be contacted for inspection and repair.

The above are some common problems and solutions of the automatic punching machine. Proper use and maintenance of the machine is the best way to avoid these problems. For the long-term normal operation of the machine, the operation and maintenance of the automatic punching machine should be done well.