Punches and Pipe punching machine Comparison 1: Drilling is the process of drilling holes on processing materials with a drill bit, while the pipe Punching machine It is the process of punching the drill bit down to form a hole by gravity. Automatic pipe punching machine It is suitable for processing soft materials, because the holes drilled by the drilling machine will have burrs and unevenness. The drilling machine is suitable for processing hard materials, because the punching force of the pipe punching machine often causes cracks in the processed materials

The second comparison between pipe punching machine and drilling machine: the processing objects of punching machine and pipe punching machine are similar to a large extent. The punching machine is divided into ordinary punching machine and rapid punching machine. Since the punching machine needs a feeding system, it is generally large in size. Pipe Auto punching machine It is a further development of the punch. It solves the problem that the punch needs an independent feeding system, so it is smaller. Pipe punching machines are divided into ordinary pipe punching machines, automatic pipe punching machines (also called automatic positioning pipe punching machines, automatic alignment pipe punching machines), full-automatic pipe punching machines, super automatic pipe punching machines, etc. 　　

The ordinary pipe punching machine has no automatic positioning system, which is equivalent to a small punching machine that solves the feeding problem. The automatic pipe punching machine adds an automatic positioning system on the basis of the ordinary pipe punching machine, greatly improving the precision and speed of punching, which can be understood as an automatic controlled high-precision small punch. The super automatic pipe punching machine can not only position itself, but also automatically feed materials in batches, greatly saving manpower.

The hydraulic automatic pipe punching machine produced by our factory adopts large torque AC synchronous servo motor, which is characterized by fast response, high positioning accuracy, low noise, small brake heat loss and long service life. Motion control: professional PLC controller, touch screen operation, simple and convenient. It can work continuously and punch 3000-5000 holes every day. The die adopts CR12MOV heat treatment to ensure its service life.