For better performance Pipe punching machine Performance, pipe Punching machine What should be paid attention to during use and later maintenance? The oil of the pipe punching machine needs to be replaced regularly. Basically, it needs to be replaced every year, and the time is less than three months, that is, it needs to be replaced within three months.

In order to ensure the flexibility of the pipe punching machine, its sliding block also needs to be often injected with lubricating oil. Generally, before the pipe punching machine runs, it needs to be injected with oil, and the column surface of the pipe punching machine needs to be clean. If the pipe punching machine has not been used for a long time, its surface should be cleaned, and anti rust oil should be coated to avoid corrosion and rust. The pipe punching machine should also be checked regularly, and the pressure gauge should be checked once every 6 months.

Check whether there is any problem with the protective safety device, lubrication and other parts, and whether the relevant fastening screws are firm and loose. When the mechanical operation is over, cut off the power supply and wipe the machine tool. In short, special attention should be paid to the daily use of the pipe punching machine, and regular inspection and maintenance should be carried out to ensure that the pipe punching machine can operate efficiently and normally.