1、 High speed Hydraulic pipe punching machine characteristic:

Our factory produces high-speed hydraulic Pipe punching machine The utility model has the characteristics of simple knot, convenient operation and good process, especially suitable for field operation, saving time and labor.

2、 Technical parameters:

1. Power source - electric pump or manual pump 630kg/cm2

2. Punching capacity - 10 mm thick for copper and aluminum rows

3. To large punching capacity - 30T

4. Weight - 18Kg

3、 Usage:

according to Zinc steel guardrail punching machine The diameter of the processed hole diameter is the mold, and this machine is equipped with ф 10.5、 ф 13.5、 ф 17.5、 ф 20.5 The four specifications of punching dies are placed between the upper and lower dies of the workpiece, and the unloading sleeve is rotated to press the workpiece tightly. After driving the single machine control valve to punch a hole, loosen the unloading valve, reset the punching die, and loosen the unloading sleeve to remove the workpiece.  

Punching machine Analyze the relationship between parts and molds

Mold is needed when making parts, so the effect will be better. In general, we can make the mold for the parts we need. If you only need to punch down the parts, whether they are round or square, then you can only make blanking dies. The punched down parts are the parts you need; If you need a circle with a hole, or a washer, then you need to make a punching blanking die.