I Angle steel punching machine summary:

yes Punching machine The first type is characterized by flat seat, which is stable and not easy to swing.

It is composed of a manual pump or an electric pump and a working head. The oil delivery hose is connected by a quick connector, which is reliable and fast in sealing.

There is no directional restriction during operation, and it is easy to assemble and disassemble. This machine is specially used for punching metal plates such as angle iron, flat iron, copper, aluminum row, etc.

2、 Application scope of angle punching machine:

The angle punching machine is suitable for field operation in electric power, construction and other industries.

3、 Technical parameters of angle punching machine:

1. Separate type Hydraulic punching machine Suitable for L H Flat steel, copper aluminum row punching.

2. A flat seat is designed at the bottom, which is stable and not easy to swing.

3. Single hole oil return, the die is made of high carbon tungsten alloy steel, which is not easy to be damaged.

4、 Use method of angle steel punching machine:

1. Connect the oil pump and the working head with a quick connector.

2. Select the corresponding upper and lower molds, and install the upper mold first and then the lower mold.

3. When installing the mold, first screw the set screw out of a certain position and then install it into the lower mold. Be sure to put it in place and then tighten the set screw to operate.

4. Put the workpiece in place, close the oil return screw of the oil pump, and move the handle until the work is completed. Loosen the oil return screw.

5. For example, when punching thin metal plates, the material return pad must be inserted between the material return foot rest and the workpiece, otherwise the workpiece will be stuck in the upper die.