1、 Rack punching machine equipment After work, there will be a lot of iron chippings, which should be cleaned in time.

If the iron chip is not cleaned for a long time, it will enter the equipment or the saw blade,

This will indirectly lead to equipment instability or saw blade tooth breakage.

2、 Rack punching machine Durability caused by installation problems.

goods shelves Punching machine When installing the saw blade of, be sure to ask professional personnel to operate, pay attention to the direction (do not install it reversely), and check whether the screws of each part are tightened.

3. Coordination performance between individual parts of rack punching machine.

After the saw blade is installed, trial cutting must be carried out, Ensure that all links are free from problems,

If there is swing, vibration and unstable sound during sawing, it must be corrected in time.

4. The saw blade of rack punching machine is not durable.

Generally, there is a problem with the equipment or the saw blade itself. We should carefully repair the equipment first,

For example, whether the installation is in place, whether the model is matched, and whether the equipment has no problem, you can consider whether it is the saw blade.

5. Check the accessories of rack punching machine.

Whether there is aging or unstable operation of the accessories is also one of the important reasons why the saw blade is not durable.

A quick inspection method can be judged by sound,

For example, the equipment makes abnormal noise during operation, and the saw blade makes unstable sound during operation.

In addition to the reasons mentioned above, there are other factors, such as whether the parameters of the saw blade correspond to the material and equipment, whether the cutting oil meets the use regulations, and whether the use is normal, which will affect the use of the saw blade.