Rack punching machine It is a kind of machine equipment used for processing and producing shelves.

It uses the working principle of punching die and punching machine to punch metal plates to achieve the purpose of making shelves.

The following describes the shelves in detail Punching machine The processing and production process.

1. Design and develop process plan.

Before starting the processing and production, it is necessary to formulate the corresponding processing scheme according to the design requirements and size parameters of the shelf.

This includes determining the punching position, hole diameter and shape, punching sequence and working parameters of the punch.

2. Prepare materials.

Select appropriate metal plates as the materials for production shelves, usually cold rolled steel plates or stainless steel plates.

According to the design requirements, cut the plate into suitable size and shape for subsequent punching.

3. Commissioning equipment.

Adjust the rack punching machine to the proper working condition.

This includes installing and adjusting the die, adjusting the stroke, pressure, processing speed and other parameters of the punch.

Ensure that the equipment can perform punching process stably and efficiently.

4. Perform punching.

Put the cut metal plate on the workbench of the rack punching machine.

According to the process plan, the punching operation shall be carried out according to the predetermined punching sequence and position.

When punching, the punching die is pressed down to cut the metal plate into holes of corresponding shape.

5. Inspection and cleaning.

After punching, check the processed shelf to see if the punching position and size meet the requirements.

If there are unqualified holes, they need to be trimmed and repaired.

At the same time, clean the punching machine and remove the metal chips and waste materials on the punching die.

6. Subsequent processing.

After the shelf is processed, follow-up treatment shall be carried out as required.

Surface treatment is usually carried out, such as spraying antirust coating or galvanizing, to improve the corrosion resistance and appearance quality of the shelves.

7. Quality inspection.

Quality inspection shall be carried out on the shelf after processing to check whether the size, shape and punching holes of the shelf meet the design requirements.

After passing the inspection, they shall be packed and stored for shipment or use.

The above is the processing and production process of the rack punching machine. In actual operation, attention should also be paid to the operation specifications to ensure the safety of operators. At the same time, the equipment shall be used reasonably and maintained regularly to ensure the normal operation of the equipment. The processing and production of shelf punching machines can improve production efficiency and product quality, and meet customer needs.