Rack punching machine In the process of use, operators must pass strict training and obtain relevant qualifications before operation.

It is not allowed to start the equipment without permission if you are not familiar with the equipment, especially its structural performance and operating procedures.

At the same time, it should be noted that the pressure of the low pressure relief valve must be controlled within the specified range during operation to ensure normal operation of the machine.

goods shelves Punching machine During the working process, it is not allowed to repair or adjust the mold.

When the equipment is found to have serious oil leakage or other abnormalities, such as abnormal operation or abnormal noise, vibration, etc,

Rack punching machine manufacturer It is emphasized that the machine should be stopped to analyze the causes and try to eliminate them. It is not allowed to make the machine work with faults.

At the same time, attention should be paid to ensuring that the system has no pressure and that all hydraulic oil returns to the oil tank before maintenance of the hydraulic station and low-pressure accumulator.

Special anti-wear hydraulic oil shall be used for the hydraulic system of rack punching machine, and the oil temperature shall be controlled within the specified range. When the oil temperature is higher than the specified degree, a cooler shall be used for cooling.

At the same time, pay attention to that the oil filter should be frequently cleaned with kerosene, the service life of the working oil should not exceed one year, and remember to check and calibrate the pressure gauge every six months.