About how to use correctly Zinc steel guardrail punching machine , there are many different views.

Due to different locations, Punching machine The use environment is also very different.

When using the punching machine, a set of maintenance and servicing plan should be formulated according to the following conditions.

In addition to operation, the following points should also be followed to extend the use time of the punching machine:

1、 Avoid corrosive acid flowing into the machine:

Compared with ordinary punching machines and punches, our punching machines are much better at resisting external forces than ordinary equipment,

However, the new type of punching machine and the ordinary punching machine should be able to prevent acid and alkali corrosion.

If the acid and alkali corrosive agent enters the machine, it will cause serious corrosion to the machine and damage the parts in the punching machine,

And it will have a huge impact on future production, so punching is to ensure that the pipeline is clean and free of corrosive liquid.

2、 Avoid frequent opening and closing:

The punching machine needs to be turned on or off frequently according to production needs, but the frequent power on/off mentioned here refers to frequent power on/off when there is no production or small-scale production.

Turn on and off the power supply, which can easily reduce the overall service life of the punching machine and cause more performance problems.

In addition, if it is necessary to extend the service life of the punching machine, we also need to establish a relevant maintenance plan for the punching machine.

When the punching machine has a small fault and it is impossible to disassemble the machine under any condition of live working, the after-sales service should be contacted,

Because there are too many uncertain factors for disassembling the machine, it is easy to cause secondary damage.