Channel steel punching machine Determinants of the journey:

The operation fate of an equipment is very harmful to this equipment. Many parts of this equipment are used to determine its key elements. Let's have a look.

Proper operation of channel steel Punching machine Punching station mode of:

1. The punching station of the cooperative punching and shearing machine must undergo learning and training,

2. Understand the structure and characteristics of machinery and equipment, understand the operation technical specifications and obtain the operation approval before operating alone.

3. Properly use the maintenance and operation equipment on the machinery and equipment, and do not remove them at will.

4. Check whether all transmission systems, connections, lubrication positions and safety protection devices of the CNC lathe are normal,

5. The mold screw must be firm and cannot be moved.

6. The CNC lathe needs to rotate aviation parts for 2-3 minutes before working,

7. Check the coordination ability of foot brake and other operating equipment, and ensure that everything is normal before application, and do not run with fault.

8. The mold is firm, and the upper mold and upper mold are aligned to ensure proper parts,

9. Carry the CNC lathe by hand to test punch (air switch) to ensure that the mold is in good condition.

10. Before driving, pay attention to moistening and take out all floating objects on the bed surface.

11. When the punching station of the cooperative punching and shearing machine is taken out or running punching, the operator should stand up properly,

12. Keep a certain distance between the hands and the head and the punching station of the cooperative punching and shearing machine, pay attention to the punching position at all times, and prohibit chatting with others.

13. When punching or making short product workpieces, professional special tools shall be used, and immediate feeding or picking up is not allowed.

14. When punching or making long parts, there should be no material support or other countermeasures to prevent digging injury.

15. During single flushing, hands and feet are not allowed to be placed on the hand and foot brakes, and must be moved (stepped) once to resolutely prevent safety accidents.

16. When two people operate on each other, the person who carries (steps on) the gate must pay attention to the posture of the feeder, and it is forbidden to carry (step on) the gate while taking goods.

17. When the work is finished, park the car immediately, disconnect the switch power supply of the channel steel punching and cutting machine, sort out the natural environment, and scrub the cooperative punching and shearing machine.