prevent Climbing frame punching machine What should we pay attention to when being eccentric?

Punching machine It can be used for sheet metal processing, stamping, molding, embossing and other operations to force metal into the mold.

When using the punching machine for operation, it is necessary to prevent the punching machine from being eccentric. What should be paid attention to at this time? Next, we will introduce the precautions to prevent the eccentricity of climbing frame punching machine!

1、 Check and adjust the clearance of each guide sleeve frequently

1. Regularly adjust the clearance of guide rail, sliding form guide post and guide sleeve to prevent eccentric impact.

2. The dimension of the pressure gauge should be larger than the plane dimension of the mold, and there should be space for fixing the mold. The leakage on the punching machine workbench should adapt to the process.

3. The anvil width of the forging hammer should match the anvil size, and the anvil length is slightly larger than the anvil.

4. The contact surface of the forging die shall be consistent with the tonnage of the equipment, and the contact surface shall be kept clean without debris embedding.

2、 Pay attention to the use of a good pressure plate

1. The punching machine has the characteristics of environmental protection and small space,

2. Loading and unloading the mold structure makes the mold replacement operation simpler and easier, and ordinary workers can complete the mold replacement operation,

3. Thus, the chef is no longer required to replace the mold, thus reducing the user's labor cost.

4. In addition to paying attention to the adjustment of the gap between the upper and lower blades, the cutter should also pay attention to the use of a good pressure plate,

5. This can avoid the wrong movement of the tool edge due to rebound in the cutting process.

3、 Use positioning equipment during stamping

1. The positioning plate and the punching positioning cover plate of the punching machine reduce the possibility of eccentric punching.

2. Long term supply punching machine consists of frame, mold, punching power organization, oil pressure, electric control system, etc.

3. The structure is welded by sections, including tool box, electric box, oil tank, etc.

4. Part Punching machine equipment The parts shall be treated according to the actual operating conditions to meet the vibration resistance of the parts.

5. The die has a scale, which is convenient for direct reading. It can adjust half or full holes of the punch at will. The flush mouth is flat, and the positioning is accurate.

The above contents that should be paid attention to in order to prevent the eccentricity of the climbing frame punching machine are introduced. I hope it will be helpful to everyone when using the punching machine!