Climbing frame punching machine Also called building climbing frame Punching machine It is an automatic equipment specially used for construction climbing frame punching and cutting. The climbing frame punching machine is a product that has sprung up in recent years. This is mainly because in the construction industry, new climbing frames have been widely used since the relatively backward scaffolds were eliminated. The advantages of climbing frames are less materials, simple construction, labor saving and higher efficiency.

Features of climbing frame punching machine:

(1) Energy saving and environmental protection, less noise, faster working efficiency than ordinary punches, small footprint, safe and secure operation.

(2) The mold change time is short. Time delay protection circuit. When nobody operates the machine, the time delay protection switch will automatically enter the standby state. If you want to start work, you need to turn on the circuit switch again.

(3) Compared with the traditional bench drill, the automatic equipment solves the shortcomings of bench drill line drawing, punching with burrs, pits, and pipe deformation.

(4) It is widely used in stainless steel, aluminum alloy hardware bathroom, color steel, zinc steel guardrail punching. It is the ideal equipment for pipe and square pipe punching at present.

(5) It can be customized to multiple working positions, easy to disassemble the mold, and easy for novices to use.

(6) It can debug and punch half hole or full hole at will, with flat punching and accurate positioning. It can also produce various new anti-theft nets (diamond anti-theft net, round tube and square tube anti-theft net, door flower, etc.).

With the rise of climbing frame, climbing frame processing equipment has also risen, so how to operate the climbing frame punching machine?

First of all, let's talk about the climbing frame punching machine, which is used to manufacture the climbing frame body as its name implies Hydraulic punching machine , which is used to complete square pipe punching and breaking. Pay attention to several points when operating this equipment.

1. First add hydraulic oil (100 liters), which must be anti-wear, because it is used for a long time.

2. After adding hydraulic oil, it is necessary to connect the air pipe of the air compressor. Generally, it is enough to use a 30L air pump. It is recommended to buy a silent model so that the noise can be reduced gradually. The air pressure should be set according to the standard value.

3. An important step: Before the test run, the machine should be adjusted to the horizontal position and the foot cup adjustment number. These are basic things that need to be done. The machine manufacturer will also have debugging personnel to install the machine at home. The machine is used by itself, which is highly efficient and saves labor. It is also a good thing to master more usage methods.