Numerical control Climbing frame punching machine Once a fault occurs, it will seriously affect the work efficiency. If the operation is improper, it will also have a more fatal impact on the life of the equipment. Use in strict accordance with standards CNC punching machine It can not only improve the efficiency, but also extend the service life. Determine whether your equipment is multi station or single station, and talk about multi station CNC Punching machine During use, only one oil circuit switch can be opened for operation at a time, and multiple oil circuit switches cannot be opened at the same time. Many people will use multiple oil circuit switches at the same time to improve efficiency, which will have a bad impact on equipment operation and processing quality.

In addition, when the climbing frame punching machine is punching, it is necessary to install the mold and insert the pipe for punching. It is strictly prohibited to empty punch when there is no pipe, otherwise the mold will be damaged. When punching the full hole, if there is no punching, it will automatically return. Please move the lower proximity switch downward to protect the mold.

In addition, it should be noted that the CNC climbing frame punching machine needs inspection and maintenance after running for a period of time. Check whether the blade of the punch needle has been passivated. If it has been passivated, remove the punch needle and grind it, or Manufacturer of climbing frame punching machine Purchase new needles. In winter, the temperature becomes low. In order to protect the equipment, it is necessary to start the machine and run it for a period of time to warm up; If the equipment operates for a long time, check the temperature of the equipment. The temperature of the hydraulic oil should be controlled between 30 and 60 ℃.