In the past, it was more traditional Punching machine In the process of machining, the workpiece is usually punched manually or semi automatically. Now, with the continuous progress of punching machine technology, some shortcomings of the former manual punching machine itself are more and more obvious. The speed is very slow, so the efficiency is very low, and semi-automatic can not carry out automatic feeding.

Most of the current shelves, fences, guardrails and anti-theft nets are processed by using CNC punching machine It is very fast and accurate, without burr, and the hole surface has a good finish. Now the use of numerical control punching machine will make it easier to clamp the workpiece, and it does not need to use some special fixtures when processing, so that the cost of the fixture can be effectively reduced, there will be no multiple clamping, and the technology of the product can be effectively improved.

Numerical control Climbing frame punching machine Frequent maintenance is required to ensure its service life; Before operation, check whether the punch and die of the numerical control punching machine are matched, otherwise the punching machine host will be damaged. When assembling the upper mold and lower mold, the lower mold model shall be consistent, and the upper mold fixing sleeve must be tightened. When placing the lower die, pay attention to the upward direction of the knife edge (the end with a small aperture), and do not damage the machine by installing it. Do not remove the quick coupler when the system has working pressure during operation. The screw rod and nut shall be lubricated with oil.

This part is composed of bed, main hydraulic cylinder, sliding block, rear cover, guide rail sliding block, mold change safety device, auxiliary material support platform, X-axis positioning device, discharge box, waste trolley, etc. The bed is of open structure, welded by steel plates. Pay attention to the waste materials generated when clearing the holes, so as not to damage the machines and tools by filling the lower die holes. Before punching, the punching die must be screwed tightly before working. If any abnormal fault is found during operation, stop punching and eliminate the fault to avoid damage to machine parts.

Foshan Jinhai Numerical Control Machinery Co., Ltd. is a manufacturer specialized in the research, development, production and sales of climbing frame punching machines for 15 years. It is located in the second industrial zone of Banbaisha Bridge, Guidan Road, the main road across the first ring road of Foshan. It is about two kilometers away from the Foshan Shanxi Station, with a good geographical location and convenient transportation. The main products are: CNC punching machine for building climbing frame and ladder, CNC punching machine for stainless steel anti-theft net Zinc steel guardrail punching machine And so on.