We know that the punching machine will vibrate during operation, which is common sense, but for the friction phenomenon caused by the loosening of the mold and the lower steel plate, Beijing Numerical control punching machine for zinc steel guardrail manufactor Many people do not pay enough attention to it. Some of them will use steel plates to pad under the mold when the abrasive tool is loose, but this cannot solve the fundamental problem and needs to be paid enough attention. purchase Numerical control punching machine for zinc steel guardrail When purchasing a CNC punching machine, you must pay attention to carefully check some details, and have more knowledge of the CNC punching machine, so that it will be more convenient to purchase. In addition, it is recommended that you choose some manufacturers with high brand, so that the product quality can be more guaranteed, and more worries can be solved.

The reason why the NC automatic punching machine for profiles is favored by a large number of manufacturers is due to its excellent performance characteristics. multi-function. The NC profile automatic punching machine can form multiple holes of any shape on pipes of any specification and material at one time, the pipe wall can be of any thickness, and the hole center distance can be adjusted at will. high-precision. Beijing purchase Numerical control punching machine for zinc steel guardrail The punching machine is controlled by the NC programming program of the machining center, and the processed hole shape is flat and the center distance is accurate. Easy to operate. Numerical control punching machine for zinc steel guardrail The whole machine is controlled by microcomputer, which is easy to operate and learn. Super efficient. The equipment can meet the requirements of a large number of openings in a unit time, and its efficiency is much higher than that of traditional punches.

In order to ensure the flexibility of the pipe punching machine, Beijing Numerical control punching machine for zinc steel guardrail manufactor The sliding block also needs to be often injected with lubricating oil. Generally, before the pipe punching machine runs, it needs to be injected with oil. The column surface of the pipe punching machine also needs to be clean. If the pipe punching machine has not been used for a long time Beijing Numerical control punching machine for zinc steel guardrail The surface shall be cleaned and coated with antirust oil to avoid corrosion and rust. The pipe punching machine should also be checked regularly, and the pressure gauge should be checked once every 6 months.

The main function of the piercing head of the numerical control punching machine is to punch the position where stainless steel and other materials need to be punched, so its position must be adjusted accurately. When debugging, pay attention to, Beijing purchase Numerical control punching machine for zinc steel guardrail In the measuring range, when the center of the pendulum is at a low point, the tip of the piercing head should be at the horizontal position of the rotation axis of the pendulum. Remove the sample splint with heavy weight, adjust the pointer to the place with large value, then place the numerical control punching machine at the position where the test starts and press the release button to let the pendulum swing, Numerical control punching machine for zinc steel guardrail Under normal circumstances, the pointer should be at the zero point. If not, use the zero adjustment screw to adjust. If it is necessary to replace heavy lumps with different weights during use, the zero point shall be re adjusted.