We know that the punching machine will vibrate during operation, which is common sense, but for the friction phenomenon caused by the loosening of the mold and the lower steel plate, Foshan Rack CNC punching machine Price Many people do not pay enough attention to it. Some of them will use steel plates to pad under the mold when the abrasive tool is loose, but this cannot solve the fundamental problem and needs to be paid enough attention. major Rack CNC punching machine When purchasing a CNC punching machine, you must pay attention to carefully check some details, and have more knowledge of the CNC punching machine, so that it will be more convenient to purchase. In addition, it is recommended that you choose some manufacturers with high brand, so that the product quality can be more guaranteed, and more worries can be solved.

In order to give better play to the performance of the pipe punching machine, what matters should be paid attention to when the pipe punching machine is used and when it is maintained later? The oil of the pipe punching machine needs to be replaced regularly, basically every year, Foshan major Rack CNC punching machine It should take less than three months, that is to say, it needs to be replaced within three months. Check whether there is any problem with the protective safety device, lubrication and other parts, and whether the relevant fastening screws are firm and loose. Rack CNC punching machine Price When the mechanical operation is over, cut off the power supply and wipe the machine tool. In short, special attention should be paid to the daily use of the pipe punching machine, and regular inspection and maintenance should be carried out to ensure that the pipe punching machine can operate efficiently and normally.

If the round pipe punching machine used by the enterprise has the specified special hydraulic oil, the special hydraulic oil should be used according to the requirements instead of mixing with other types of hydraulic oil. Foshan major Rack CNC punching machine If the round pipe punching machine does not have the specified hydraulic oil, the appropriate hydraulic oil brand can be selected according to the working environment and working conditions of the hydraulic system. After selecting the type of hydraulic oil, the enterprise must also determine the viscosity of the hydraulic oil required by the pipe punching machine. Rack CNC punching machine The viscosity should be selected according to the temperature range of the geographical location. Generally speaking, the thinner hydraulic oil can be used in the northern region, and the hydraulic oil with a slightly higher viscosity can be used in the southern region. Because the temperature in the north is low, if the viscosity of the hydraulic oil is high, it is not conducive to the operation of the hydraulic system in the low temperature environment.

In order to ensure the flexibility of the pipe punching machine, Foshan Rack CNC punching machine Price The sliding block also needs to be often injected with lubricating oil. Generally, before the pipe punching machine runs, it needs to be injected with oil. The column surface of the pipe punching machine also needs to be clean. If the pipe punching machine has not been used for a long time Foshan Rack CNC punching machine The surface shall be cleaned and coated with antirust oil to avoid corrosion and rust. The pipe punching machine should also be checked regularly, and the pressure gauge should be checked once every 6 months.