Full automatic punching machine It is a very popular processing equipment for pipe punching and blanking at present, with high speed, high processing efficiency and relatively affordable price. whole Auto punching machine Does it work? It must be easy to use.

What should we pay attention to before using? Let's get to know.

1. Fully automatic Punching machine Generally, the manufacturer will ask the logistics personnel to deliver the goods to the door. Before unloading, check whether the equipment is in good condition. If there is any problem, contact the manufacturer in time.

2. Install the equipment, add proper hydraulic oil, and find a professional electrician to connect the power.

3. In order to ensure the operator's own safety, it is forbidden to operate the motor without oil, otherwise it will cause certain harm to personal safety.

4. After the mold is installed, the equipment must be operated with both hands when debugging the full-automatic punching machine. It is not allowed to set the program with one hand and adjust the mold with one hand.

5. When machining parts, no part of the limbs is allowed to enter the working area of the slider.

6. It is strictly prohibited to take and place workpieces in the sliding block working area by hand. Standard special tools must be used to take and place workpieces in the die.

7. In order to correctly and reasonably use the automatic punching machine, the newly recruited staff must be trained in operation under the guidance of skilled technicians.

8. Do not operate the machine until you have a certain understanding of the machine and reach a certain proficiency level.

9. Before starting the full-automatic punching machine, carefully check whether the station layout is proper and whether there are abnormal objects in the workbench or mold area.

10. Only after confirming that there is no abnormal situation can the work be started.

11. The full-automatic punching machine needs to be repaired or the punching die needs to be adjusted or replaced, When the machine is shut down for troubleshooting, a warning board must be placed at the starting switch of the equipment motor to avoid damage to the machine caused by misoperation of other personnel.