In the past, it was more traditional Punching machine In the process of machining, the workpiece is usually punched manually or semi-automatically,

Now, with the continuous progress of punching machine technology, some shortcomings of the previous manual punching machine itself are more and more obvious,

The speed is very slow, so the efficiency is very low. If it is semi-automatic, automatic feeding cannot be carried out.

Most of the current shelves, fences, guardrails and anti-theft nets are processed by using CNC punching machine To complete,

In addition, it is very fast in speed, high in accuracy, free of burrs, and has a good surface finish.

Now using the CNC punching machine will make it easier to clamp the workpiece,

There is no need to use some special fixtures when processing, which can effectively reduce the cost of fixtures,

There will be no repeated clamping, and the product process can be effectively improved.

numerical control Climbing frame punching machine Frequent maintenance is required to ensure its service life;

Before operation, check whether the punch and die of the numerical control punching machine are matched, otherwise the punching machine host will be damaged.

When assembling the upper mold and lower mold, the lower mold model shall be consistent, and the upper mold fixing sleeve must be tightened.

When placing the lower die, pay attention to the upward direction of the knife edge (the end with a small aperture), and do not damage the machine by installing it.

Do not remove the quick coupler when the system has working pressure during operation. The screw rod and nut shall be lubricated with oil.

This part is composed of bed, main hydraulic cylinder, sliding block, rear cover, guide rail sliding block, mold change safety device, auxiliary material support platform, X-axis positioning device, discharge box, waste trolley, etc. The bed is of open structure, welded by steel plates.  

Pay attention to the waste materials generated when clearing the holes, so as not to damage the machines and tools by filling the lower die holes. Before punching, the punching die must be screwed tightly before working.

If any abnormal fault is found during operation, stop punching and eliminate the fault to avoid damage to machine parts.

Foshan Jinhai Numerical Control Machinery Co., Ltd. is a manufacturer specialized in the research, development, production and sales of climbing frame punching machines for 15 years. It is located in the second industrial zone of Banbaisha Bridge, Guidan Road, the main road across the first ring road of Foshan. It is about two kilometers away from the Foshan Shanxi Station, with a good geographical location and convenient transportation. The main products are: CNC punching machine for building climbing frame and ladder, CNC punching machine for stainless steel anti-theft net, zinc steel guardrail punching machine and other customized equipment for pipes.