Climbing frame punching machine It is a machine tool commonly used for punching metal plates.
The purpose of adjusting the machine tool is to ensure that the machine tool can operate normally and achieve the desired processing effect.
The climbing frame will be introduced below Punching machine Adjustment method of.
1. Before adjusting the climbing frame punching machine, it is necessary to check all parts of the machine tool.
First, check whether the machine tool is firmly installed and whether all screws are fastened.
Then, check whether the punches, dies and cutting tools are installed correctly and whether they are worn seriously.
Next, check the hydraulic system and electrical system for normal operation, and check and clean the cooling system of the machine tool.
Check whether the overall operation of the machine tool is smooth, and whether there is abnormal sound or vibration in each component.
2. Specific adjustment method for climbing frame punching machine.
First, adjust the height and stroke of the punch.
By adjusting the limit switch above the punch, you can control the height of the drop of the punch.
Adjust the position of the limit switch properly according to the thickness of the material to be punched and the depth of the punch to ensure that the drop height of the punch is appropriate.
Then, the stroke of the punch can be controlled by adjusting the stroke adjusting pin on the punch.
Adjust the position of stroke adjusting pin according to the punching position to ensure the accuracy and consistency of punching.
3. It is necessary to adjust the position of the punching die and the punching spacing.
The punching position can be changed by adjusting the position of the punching die.
Generally speaking, the climbing frame punching machine will have a punching position adjustment device, which can be used to adjust the position of the punching die.
Adjust the position of the punching position adjusting device according to the punching position required to ensure the accuracy of punching.
In addition, the punching spacing can be changed by adjusting the adjusting pin above the punching die.
Adjust the position of the adjustment pin according to the required punching spacing to ensure the consistency and uniformity of punching.
4. It is necessary to adjust the position and cutting length of the cutting tool.
The climbing frame punching machine is usually equipped with a cutting tool for cutting plates.
The cutting position can be changed by adjusting the position of the cutting tool.
Generally speaking, the position of the cutting tool can be achieved by adjusting the adjustment pin on the cutting tool.
Adjust the position of the adjusting pin according to the cutting position to ensure the cutting accuracy.
In addition, the cutting length can be changed by adjusting the cutting length adjusting pin on the cutting tool.
According to the length to be cut, adjust the position of the adjusting pin of the cutting length properly to ensure that the cutting length meets the requirements.
5. It is necessary to adjust the operating parameters of the climbing frame punching machine.
It includes adjusting the pressure of the hydraulic system, adjusting the speed of the transmission system and adjusting the punching speed.
By adjusting the pressure of the hydraulic system, the lowering speed of the punch and the punching force can be controlled.
Properly adjust the pressure of the hydraulic system according to the materials to be punched and the punching requirements to ensure the punching effect.
In addition, the running speed of the machine tool can be controlled by adjusting the speed of the transmission system.
Properly adjust the speed of the transmission system according to the materials to be processed and the processing requirements to ensure that the machine tool runs at a proper speed.
The punching speed can be controlled by adjusting the punching speed.
Adjust the punching speed properly according to the materials to be punched and the punching requirements to ensure the efficiency and quality of punching.
To sum up, the adjustment method of climbing frame punching machine mainly includes adjusting the height and stroke of the punch, adjusting the position and spacing of the punching die, adjusting the position and cutting length of the cutting cutter, and adjusting the operating parameters of the machine tool. By reasonably adjusting these parameters, the climbing frame punching machine can be ensured to operate normally and achieve the expected processing effect.
