Zinc steel guardrail punching machine Features of:

1. High performance zinc steel Guardrail punching machine It can automatically adjust the automatic work of full hole, half hole and single piece with equal distance and single piece with unequal distance. It is well-known that zinc steel guardrail Punching machine It has high working efficiency. The empty pipe processed by it has no burr. Visually, the product is relatively good, and tactically, it is smooth and tidy, so that the steel pipe device reflects its high quality, because the zinc steel barrier punching machine is used in various occasions. The punching effect of the zinc steel fence punching machine is excellent. After punching, there will be no burr, and it will not affect the pipe diameter and other surrounding areas during rapid pipe punching. Therefore, it is simple and convenient, while making it easier for newcomers to use. Generally speaking, the zinc steel fence punching machine has relatively low requirements for technicians, Even the inexperienced people can use it at their discretion,

2. Insert the workpiece into the die head and opening, align it with the scribe line, and rotate the die for clamping. Numerical control zinc steel fence punching machine has large punching force and can adapt to different materials.

3. The automatic punch is highly automatic, light and easy to carry. Shake the handle and press down the punch to punch out the hole. However, no matter what kind of professional punching machine is used and maintained, it should be strictly in accordance with the manufacturer's instructions.

4. Fast speed: the camera response time is short. Once the figure is found, it can control the position of the figure to punch. The average punching number is 0.3 seconds/hole, which is more than 5 digits of manual positioning punching.

5. By combining high and new technology, the new generation of punching machine is specially designed through the hedging needle, which saves the time of die changing and improves the working efficiency.

During use, everyone should pay attention to:

1. The typing side of the lower die shall be upward, not downward.

2. When replacing the mold, take down the upper mold to replace the lower mold. Punching machines can be divided into manual punching machines, automatic positioning/alignment punching machines Full automatic punching machine Etc.

3. Do not switch on and off the machine very frequently. Everyone knows that it is really necessary to turn on and off the zinc steel fence punching machine with good quality during use. However, if you switch on and off the machine very frequently, the life of the zinc steel fence punching machine will be greatly reduced. The so-called "extremely frequent switch on and off" here refers to turning off the machine after the machine is turned on momentarily for a long time, or turning it on again after the machine is turned off, It will accelerate the aging of various parts and even directly cause damage.