1. The hydraulic oil temperature is too high

Punching machine All of them rely on hydraulic oil to operate, which is to convert the hydraulic oil into kinetic energy. When our machine runs for a long time, the oil temperature in the hydraulic system keeps rising. When our oil temperature reaches the temperature, and we cannot get good cooling, our machine will automatically open the protection device, and there will be a short power failure, and the machine will no longer start.

2. The pressure of oil cylinder is too high

During use, pay attention to adjust the pressure value of our oil cylinder to the appropriate range, remember not to operate blindly, and adjust the pressure value to the range beyond the tolerance of the punching machine oil cylinder

3. The line of the machine fails

If there is a fault in the electric box, it will also cause the machine to stop running. The faults we say are short circuit and wiring errors. In order to avoid this phenomenon, we should ask technicians to check our electric box system regularly, and if the circuit of the electric box is not professional, please do not adjust and maintain it, If the circuit is aging or abnormal, replace the circuit in time.

Rack punching machine The widespread use of, solved many enterprises processing punching difficult problem, what is its advantage?

1. The rack punching machine has the characteristics of energy conservation and environmental protection. It saves electricity, has low noise, is faster in working efficiency than the ordinary punching machine, and is safe in operation.

2. The blade is specially designed, and the mold change time is short. Delay protection circuit. When no one operates the machine, the time delay protection switch will automatically enter the standby state. If it starts to work, the circuit switch needs to be restarted.

3. Compared with the traditional bench drill, the punching machine solves the defects of bench drill such as scribing, burr, pit and pipe deformation.

4. The punching machine is widely used for punching stainless steel, aluminum alloy hardware bathroom, color steel, zinc steel guardrail, and is currently the main pipe and square pipe punching processing equipment.

5. A variety of operations can be customized, the disassembly and assembly of the mold is simple, the mold is durable, and the novice is easy to use.