Climbing frame punching machine As a special equipment for tapping and punching holes independently, it is widely used in various industries. along with Climbing frame Punching machine With the continuous development of, many enterprises have begun to use this device, so we are using Climbing frame What problems should we pay attention to when punching? Here are some key points about using.

1. When punching, place the punching materials that are easy to fit on the punching machine. Do not stand upside down or tilt, which will directly affect the accuracy of the hole. In addition, pay attention to the speed of hole rotation. If it is too fast, personal danger may occur, and if it is too slow, the work efficiency will be affected.

2. Please pay attention to the power supply. Large punching machines have slightly higher power requirements. If you want to switch sockets, please choose the machine that matches them. Small machines naturally require less electric power, and ordinary power supplies can generally meet the requirements. If the electric power does not match the machine setting, there is a possibility of fire.

3. Regularly check the lubricating oil and the sharpness of the drill bit. Lubricating oil helps the machine run smoothly, greatly improving punching efficiency and product smoothness. The sharpness of the punch is important to the accuracy of the workpiece, both of which are key parts.

4. Punching shall be placed in a specific box to avoid vibration and collision.

5. The diameter shall be measured by measuring instrument, and the equipment shall not be damaged due to contact with the measuring instrument.

6. Take out the punching hole from the box and put it in the designated position. After use, put it back to the original place for safekeeping.

seven Climbing frame Some functions of different types of punching machines are different, but the positioning ring must be used to ensure consistent depth. If you do not pay attention, you may drill to the table or scrap.