At present, the first-class full-automatic punching machine for zinc steel guardrail has been widely used in our life. Jilin purchase Guardrail CNC punching machine Customers who often use full-automatic punching machines for zinc steel guardrails should all know that because of its simple structure, easy operation, light weight, convenient handling and other advantages, the full-automatic punching machine has been used in many aspects such as stainless steel, anti-theft net, aluminum alloy and so on. Pay attention to the grinding of the machine table steel plate. This is the key point. Customers should know that, Guardrail CNC punching machine The machine will produce varying degrees of "vibration" during operation, but people pay less attention to the looseness and wear of the mold and the underlying steel plate during the vibration process, but the problem comes out after a long time, so the customer must pay attention to the polishing of the table steel plate of the full-automatic punching machine.

When punching with the climbing frame punching machine, after the mold is installed, insert the pipe for punching. It is strictly prohibited to empty punch when there is no pipe, otherwise the mold will be damaged, Jilin Guardrail CNC punching machine When punching full holes, if there is no punching, it will automatically return. Please move the lower proximity switch downward to protect the mold. In addition, it should be noted that the CNC climbing frame punching machine needs inspection and maintenance after running for a period of time. Check whether the blade of the punching needle has been passivated. If it has been passivated, please remove the punching needle and grind it, or purchase a new punching needle from the climbing frame punching machine manufacturer. In winter, the temperature becomes low. To protect the equipment, Guardrail CNC punching machine Which one is good If necessary, the engine should be started up and run idle for a period of time to warm up; If the equipment operates for a long time, check the temperature of the equipment. The temperature of the hydraulic oil should be controlled between 30 and 60 ℃.

The automatic punching machine has beautiful appearance, reasonable and simple structure, and is easy to operate, Jilin Guardrail CNC punching machine Which one is good In this way, the cost of training staff can be saved, and the accuracy of the automatic punching machine is high. The climbing frame automatic punching machine agent is not easy to make mistakes, purchase Guardrail CNC punching machine Even the most rigorous operation can be completed accurately. The operation screen of the automatic punching machine is a 7-inch touch screen, which is convenient for operation. The automatic punching machine adopts hydraulic and mechanical structure, with stable physical performance and strong adaptability.

The conveying precision of the feeder of the new construction climbing frame punch is relatively high, Jilin Guardrail CNC punching machine When working, directly input the length of the feeder to achieve accurate realization and the required step distance. CNC punch feeder can be transformed into multi section feeding according to customer needs, saving energy. Guardrail CNC punching machine Which one is good The CNC punch feeder has good safety performance, which can avoid accidents, reduce the labor intensity of workers, and create greater economic benefits.