The customer should implement the configuration of the automatic punching machine, such as working and operating principles, motor power, etc. purchase Guardrail CNC punching machine Which one is good It also depends on what is easy to ignore at ordinary times: such as the thickness of steel plate, or even the material of die steel. Whether the machine table is reinforced or thickened. Guardrail CNC punching machine See if the design is humanized. Mechanical things will inevitably break down, but some businesses only consider occupying the market at a low price without considering these details, but these details will directly affect the customer's future production.

In order to ensure the flexibility of the pipe punching machine, Suzhou Guardrail CNC punching machine Which one is good The sliding block also needs to be often injected with lubricating oil. Generally, before the pipe punching machine runs, it needs to be injected with oil. The column surface of the pipe punching machine also needs to be clean. If the pipe punching machine has not been used for a long time Suzhou Guardrail CNC punching machine The surface shall be cleaned and coated with antirust oil to avoid corrosion and rust. The pipe punching machine should also be checked regularly, and the pressure gauge should be checked once every 6 months.

With the arrival of the automation era, the use of CNC thick wall pipe punching machines has become more and more common. However, in the process of using the punching machine, we should first pay attention to safety production. The site where the stainless steel punching machine is used should remove obstacles such as hole locations and surrounding stones according to the requirements of the punching machine instructions. Suzhou Guardrail CNC punching machine Which one is good The distance from the operation site to the power transformer or power supply trunk line shall be within 200m, and the voltage drop during startup shall not exceed 10% of the rated voltage. The motor and control box shall have good grounding device. Before installation, Guardrail CNC punching machine Check and confirm that the punch bar and all parts are free of deformation; After installation, the allowable deviation of the center line between the punch and the power head is 1% of the total length.

High efficiency and high precision of products are the main direction. Speed and precision are two important indicators of CNC machine tools such as punching machines, which directly affect the quality and grade of products, the production cycle of products and the competitiveness in the market. Suzhou Guardrail CNC punching machine Which one is good The improvement of machining accuracy requires improving the control accuracy of the system; High efficiency requires improving the parameters of high-end CNC system. secondly, Guardrail CNC punching machine We should develop in the direction of intelligence. Intelligent punching machines are required to have the characteristics of automation and intelligence. Artificial intelligence is constantly infiltrating and developing in the computer field. Numerical control systems are developing in the direction of intelligence. With the help of intelligent technology, equipment has the functions of adaptive control, intelligent diagnosis, intelligent monitoring, etc.

The lubrication function of the pipe punching machine will be gradually weakened after long-term use, which will lead to increased friction and damage in the process of equipment operation. Even professional pipe punching machines are not immune, Suzhou Guardrail CNC punching machine Therefore, in order to avoid this kind of situation, it is necessary to add lubricant in time, especially the position of the punch to maintain lubrication, reduce friction and extend the service life of the equipment. The pipe punching machine is the most taboo to be impacted by foreign objects. Even if the impact degree is not large, component failure is likely to occur. Guardrail CNC punching machine Which one is good Therefore, whether before or after use, check whether there is any foreign matter between the punch and the lower die, and use carefully to prevent the punch from being damaged due to the extrusion of the punch and the lower die caused by foreign matters.