This model is equipped with two punching cylinders, which can be used for punching single or multiple cylinders respectively. The upper cylinder can be adjusted to punch half or full holes. The climbing frame automatic punching machine is easy to operate, superior in quality and reasonable in price, Jilin Hydraulic punching machine It meets the quality requirements of domestic and foreign markets, and can process high-quality and high-precision workpieces. The punching hole of this machine is flat without burrs, and the positioning is accurate. The clamping, lifting and other mechanisms of the whole machine are controlled by air pressure or hydraulic pressure. The positioning of workpieces (X, Y coordinates) is driven by servo, and the control of the whole machine is controlled by microcomputer, Hydraulic punching machine Price Parameter setting and operation switching are performed through the touch screen interface, which is simple and convenient to operate, and can store more than 100 product processing parameters.
Roller servo feeder, mountain type clamp feeder, hydraulic punching machine, servo feed square and rectangular pipe punching machine, CNC automatic punching machine for profiles is a new type of automatic processing equipment, which can process half holes or full holes on square pipes, round pipes and special-shaped pipes of different materials, Jilin Hydraulic punching machine By changing the mold, it can also process various sizes and shapes of hole diameters, and can process guardrails, door flowers, shelves and other pipes, which are widely used in modern processing industry. Low cost. The cutting tool of the NC profile automatic punching machine consumes less energy, and the automatic operation saves a lot of manpower, and the pipe processing cost is greatly reduced. NC automatic punching machine for profiles is one of the advanced automatic punching equipment in the industry at present, Hydraulic punching machine Price It has many functions, high precision and low cost, which has brought great convenience to pipe processing, and is actually an important contributor to modern processing industry.
In order to enable the square pipe punching machine to effectively achieve a sound punching effect, the punching of the equipment should be checked regularly, purchase Hydraulic punching machine And ensure that there is no aging in the mold to prevent the punching effect of processed objects from being affected. In order to make the square pipe punching machine have a better punching effect and extend its service life, Hydraulic punching machine Price During the use, adequate maintenance and overhaul shall be carried out, and the greasy dirt and other dirt on the equipment shall be cleaned timely after each punching operation.
In order to ensure the flexibility of the pipe punching machine, Jilin Hydraulic punching machine Price The sliding block also needs to be often injected with lubricating oil. Generally, before the pipe punching machine runs, it needs to be injected with oil. The column surface of the pipe punching machine also needs to be clean. If the pipe punching machine has not been used for a long time Jilin Hydraulic punching machine The surface shall be cleaned and coated with antirust oil to avoid corrosion and rust. The pipe punching machine should also be checked regularly, and the pressure gauge should be checked once every 6 months.
In order to improve the safety of operation, the operators should not only strictly abide by their posts, but also place all tools and accessories on the NC punching machine at the specified positions, so as to avoid accidents caused by the impact on the equipment during the operation of the punching machine. If everyone can follow the regulations when operating the NC punching machine, and do a good job in the relevant inspection work, and at the same time improve the safety awareness, then the operation safety of the NC punching machine can be effectively improved, which can not only make employees feel safer when working, but also improve the efficiency of production and processing, And save the cost of handling accidents for enterprises.
On the one hand, the competitiveness of the manufacturing industry lies in price and quality. Large scale automated manufacturing can establish a comparative advantage between price and quality for enterprises, Jilin purchase Hydraulic punching machine It not only greatly improves the accuracy and quality of products, but also guarantees the delivery date. On the other hand, the use of robots has combined and compressed the original production lines, greatly improving the utilization rate of the workshop and improving the output per unit area. In addition, robots work in dangerous and labor-intensive positions such as dispensing, welding and handling, Hydraulic punching machine It has not only solved the outstanding problem of difficult employment, but also solved the problem of environmental protection, making the labor-intensive industry become a technology intensive industry.
