Most of the current shelves, fences, guardrails and anti-theft nets are processed by CNC punching machines, Chongqing Semi automatic punching machine It is very fast in speed and high in accuracy. There is no burr. The hole surface has a good finish. Now using the CNC punching machine will make it easier to clamp the workpiece, purchase Semi automatic punching machine It is also unnecessary to use some special fixtures during processing, which can effectively reduce the cost of fixtures, avoid multiple clamping, and effectively improve the product process.

The normal CNC punching machine can customize the operation procedure of the product according to the customer's product requirements, Chongqing Semi automatic punching machine And the whole process does not require professional computer personnel to program. The CNC punching machine has specially designed a humanized human-computer interactive operation screen. The operator only needs to input the required punching hole diameter, punching hole position, thickness and other variables, and then just wait and observe whether the equipment is in good condition. The CNC punching machine adopts the domestic double vane pump as the main component equipment of its bearings, purchase Semi automatic punching machine Compared with the traditional pump, this equipment has the characteristics of low noise, high efficiency, large flow and long service life. At the same time, the high-quality CNC punching machine is specially equipped with a high-quality cooling system to ensure the smooth and efficient operation of the equipment.

The insufficient strength of the punching machine for zinc steel guardrail is the direct cause of the fracture or excessive residual deformation of the parts in work. Chongqing Semi automatic punching machine manufactor The strength of parts is divided into volume strength and surface contact strength. For example, if the stress produced by the pipe punching machine parts under the load is within a large volume, the strength of the parts under this stress state is called volume strength (strength for short). Semi automatic punching machine If two parts change from point contact or line contact to small surface contact before and after being loaded, and their surfaces produce large local stress (called contact stress), then the strength of the parts is called surface contact strength (called contact strength for short).

In order to enable the square pipe punching machine to effectively achieve a sound punching effect, the punching of the equipment should be checked regularly, purchase Semi automatic punching machine And ensure that there is no aging in the mold to prevent the punching effect of processed objects from being affected. In order to make the square pipe punching machine have a better punching effect and extend its service life, Semi automatic punching machine manufactor During the use, adequate maintenance and overhaul shall be carried out, and the greasy dirt and other dirt on the equipment shall be cleaned timely after each punching operation.

The customer should implement the configuration of the automatic punching machine, such as working and operating principles, motor power, etc. purchase Semi automatic punching machine manufactor It also depends on what is easy to ignore at ordinary times: such as the thickness of steel plate, or even the material of die steel. Whether the machine table is reinforced or thickened. Semi automatic punching machine See if the design is humanized. Mechanical things will inevitably break down, but some businesses only consider occupying the market at a low price without considering these details, but these details will directly affect the customer's future production.