In order to ensure that the round pipe punching machine has good quality and use effect, it is recommended that enterprises choose genuine hydraulic oil with relatively high cost performance. Because the hydraulic oil with good brand has high purity and less impurities, it will not be worn by impurities after being used for the round pipe punching machine, and the oil is not easy to deteriorate, Tianjin Semi automatic hydraulic punching machine Can play a better role. As the hydraulic system is an important part of the pipe punching machine, and the hydraulic oil plays a crucial role in it, purchase Semi automatic hydraulic punching machine When using the round pipe punching machine, enterprises should not only use the equipment according to the operating rules, but also pay attention to adding and replacing the hydraulic oil in the hydraulic system regularly to ensure that the quality and life of the round pipe punching machine will not be affected.

The main function of the piercing head of the numerical control punching machine is to punch the position where stainless steel and other materials need to be punched, so its position must be adjusted accurately. When debugging, pay attention to, Tianjin purchase Semi automatic hydraulic punching machine In the measuring range, when the center of the pendulum is at a low point, the tip of the piercing head should be at the horizontal position of the rotation axis of the pendulum. Remove the sample splint with heavy weight, adjust the pointer to the place with large value, then place the numerical control punching machine at the position where the test starts and press the release button to let the pendulum swing, Semi automatic hydraulic punching machine Under normal circumstances, the pointer should be at the zero point. If not, use the zero adjustment screw to adjust. If it is necessary to replace heavy lumps with different weights during use, the zero point shall be re adjusted.

The space requirement is that the stainless steel punching machine can process multiple surfaces after the workpiece is installed at one time, so it is required that the fixture can meet the space requirement that each tool can approach all the machining surfaces. In addition, the supporting plate of the fixture moves, supports, sinks and rotates, so the fixture should not interfere with the machine tool in any way. Tianjin Semi automatic hydraulic punching machine Rapid re adjustment requires that the NC punching machine can change the processing object by quickly changing the processing program. In order to reduce the auxiliary time for changing tooling and the waiting idle time for valuable equipment, Semi automatic hydraulic punching machine manufactor When the workpiece is replaced, the fixture is required to have the function of rapid readjustment or replacement of positioning clamping elements. In addition, the processing time of a single piece increases due to the multi surface processing in NC processing. At this time, if the fixture is designed to be able to replace the workpiece outside the working area of the machine tool, the production efficiency can be improved

In the past, the traditional punching machine usually used manual or semi-automatic punching to finish punching the workpiece. Now, with the continuous progress of punching machine technology, some shortcomings of the former manual punching machine itself are more and more obvious, Tianjin Semi automatic hydraulic punching machine manufactor The speed is very slow, so the efficiency is very low. If it is semi-automatic, automatic feeding cannot be carried out. CNC climbing frame punching machine needs frequent maintenance to ensure its life; Before operation, check whether the punch and die of the numerical control punching machine are matched, otherwise the punching machine host will be damaged. When assembling the upper and lower moulds, the models of the upper and lower moulds must be the same, and the fixing sleeve of the upper mould must be tightened. purchase Semi automatic hydraulic punching machine When placing the lower die, pay attention to the upward direction of the knife edge (the end with a small aperture), and do not damage the machine by installing it. Do not remove the quick coupler when the system has working pressure during operation. The screw rod and nut shall be lubricated with oil.