In order to ensure the flexibility of the pipe punching machine, Heilongjiang Climbing frame punching machine manufactor The sliding block also needs to be often injected with lubricating oil. Generally, before the pipe punching machine runs, it needs to be injected with oil. The column surface of the pipe punching machine also needs to be clean. If the pipe punching machine has not been used for a long time Heilongjiang Climbing frame punching machine The surface shall be cleaned and coated with antirust oil to avoid corrosion and rust. The pipe punching machine should also be checked regularly, and the pressure gauge should be checked once every 6 months.

The normal CNC punching machine can customize the operation procedure of the product according to the customer's product requirements, Heilongjiang Climbing frame punching machine And the whole process does not require professional computer personnel to program. The CNC punching machine has specially designed a humanized human-computer interactive operation screen. The operator only needs to input the required punching hole diameter, punching hole position, thickness and other variables, and then just wait and observe whether the equipment is in good condition. The CNC punching machine adopts the domestic double vane pump as the main component equipment of its bearings, purchase Climbing frame punching machine Compared with the traditional pump, this equipment has the characteristics of low noise, high efficiency, large flow and long service life. At the same time, the high-quality CNC punching machine is specially equipped with a high-quality cooling system to ensure the smooth and efficient operation of the equipment.

The automatic punching manipulator is a kind of equipment specially developed to realize automatic punching unmanned production based on automatic equipment and according to the characteristics of punching production. Heilongjiang Climbing frame punching machine It can replace manual punching, handling, loading and unloading of materials at each punching station, and improve the working efficiency of the whole production line. The automatic punching manipulator can be used in processing industries with high repetition, danger and rhythm, such as punching, Climbing frame punching machine manufactor It is an important embodiment of the spirit of "pioneering and innovating" in modern chemical industrialization in terms of saving labor costs, improving labor and equipment safety, and maintaining product capacity, quality, process stability, etc. The press manipulator can be connected by multiple single press manipulators to form a press production line, which will better improve production efficiency.

During commissioning, it is not necessary to feed materials, but it is necessary to first raise the guide screw on the guide plate, and then gradually adjust the ram of the punch to the bottom dead center by inching. It is necessary to pay special attention to that the guide plate should not press the floating rod too low, otherwise the floating rod will be bent or broken. purchase Climbing frame punching machine manufactor When starting the punching machine for continuous punching, it is necessary to rotate the speed adjusting screw of the nc servo feeder clockwise. The slider moves slightly slowly, so that it can be seen whether the slider touches the nylon gasket and the length adjusting screw when it moves back and forth. Climbing frame punching machine If the full-automatic punching machine only touches the length adjusting screw but not the nylon gasket when the sliding block moves back and forth, it is because the floating rod is lowered too deep, and the guide screw on the punching machine needs to be gradually raised.

Don't just look at the price, but consider the manufacturing process of CNC punching machines from the perspective of quality and cycle, which can be roughly divided into ten categories. The climbing frame punching machine is based on different requirements of part materials, physical and chemical properties, mechanical strength, dimensional accuracy, surface finish, service life, economy, etc, Heilongjiang Climbing frame punching machine Select different types of dies to form. Some parts have special requirements when forming, and the CNC punching machine also needs to use advanced processes such as hot runner, gas assisted molding, cylinder, etc. purchase Climbing frame punching machine In general, whether the machine tool has a blank holder mechanism, or even a side lubricant, multi station progressive, etc., should be considered for large stamping dies. The climbing frame punching machine should not only focus on product design, but also ignore the service life of the mold.