In order to give better play to the performance of the pipe punching machine, what matters should be paid attention to when the pipe punching machine is used and when it is maintained later? The oil of the pipe punching machine needs to be replaced regularly, basically every year, Harbin major Climbing frame CNC punching machine It should take less than three months, that is to say, it needs to be replaced within three months. Check whether there is any problem with the protective safety device, lubrication and other parts, and whether the relevant fastening screws are firm and loose. Climbing frame CNC punching machine manufactor When the mechanical operation is over, cut off the power supply and wipe the machine tool. In short, special attention should be paid to the daily use of the pipe punching machine, and regular inspection and maintenance should be carried out to ensure that the pipe punching machine can operate efficiently and normally.

Science and technology bring convenience to people, improve work efficiency and increase income. The CNC climbing frame punching machine is a fast punching equipment independently developed by Jinhai, which can be used for punching C-shaped steel, square steel and channel steel. Harbin Climbing frame CNC punching machine manufactor It is widely used in mining, tunnel, construction engineering and other fields. Compared with the same type of products on the market, Climbing frame CNC punching machine This product improves the punching precision and speed, and is suitable for two feed servo motors, imported hydraulic oil pump, contact phone of climbing frame automatic punching machine, PLC operating system, and can also match a variety of molds, achieving a true sense of "multi-function". The CNC climbing frame full-automatic punching machine works better together with the special die produced by Yinjiang, bringing infinite convenience to new and old users.

During the test run of the full-automatic punching machine, the sliding block moves back and forth. If the stainless steel pipe fence punching machine only touches the nylon gasket and does not touch the length adjustment screw, it is because the floating rod can not be lowered deep, and the guide screw on the punching machine needs to be gradually adjusted downward. major Climbing frame CNC punching machine manufactor The hydraulic high-speed punching machine is widely used in stainless steel (zinc steel, aluminum alloy, steel pipe, welded pipe, seamless pipe, square pipe, round pipe, flat iron, channel steel, angle iron) profiles, fan factories, air conditioning parts factories, antenna factories, shelf factories, metal furniture factories, automobile parts factories Harbin Climbing frame CNC punching machine Building materials manufacturers and other hardware pipe fittings, profiles punching processing. Automatic and semi-automatic equipment can be customized according to customer requirements.

The space requirement is that the stainless steel punching machine can process multiple surfaces after the workpiece is installed at one time, so it is required that the fixture can meet the space requirement that each tool can approach all the machining surfaces. In addition, the supporting plate of the fixture moves, supports, sinks and rotates, so the fixture should not interfere with the machine tool in any way. Harbin Climbing frame CNC punching machine Rapid re adjustment requires that the NC punching machine can change the processing object by quickly changing the processing program. In order to reduce the auxiliary time for changing tooling and the waiting idle time for valuable equipment, Climbing frame CNC punching machine manufactor When the workpiece is replaced, the fixture is required to have the function of rapid readjustment or replacement of positioning clamping elements. In addition, the processing time of a single piece increases due to the multi surface processing in NC processing. At this time, if the fixture is designed to be able to replace the workpiece outside the working area of the machine tool, the production efficiency can be improved

When the parts of the pipe punching machine are working, under the rated working conditions, they will not be damaged in any form, nor will they produce residual deformation beyond the allowable limit, and can ensure the normal operation and work of the machine, so it is considered that the parts meet the strength requirements. Harbin Climbing frame CNC punching machine In design, most important parts are checked by strength conditions (relevant strength theory in engineering mechanics), except some parts with small force or complex shape that cannot be calculated are determined by experience and experiments. major Climbing frame CNC punching machine If the strength of the parts is not enough, the overall fracture, surface contact fatigue or plastic deformation and other failures will occur and the working ability will be lost, so the strength requirements must be met when designing the parts.