Now used in the industry Punching machine More and more, especially in some pipe industry, most of them will use punching machines.

Hydraulic punching machine It is currently widely used. We know that any device should follow some rules when using it.

Improper operation or improper use will not only cause mechanical failure, but also affect the service life of the machine.

Moreover, illegal operation may cause injury to operators, so it is very important to use the punching machine correctly, and reasonable use can reduce its failure.

Climbing frame punching machine Also called building climbing frame punching machine, it is an automatic equipment specially used for building climbing frame punching and cutting processing.

Climbing frame punching machine is a new product in recent years.

This is mainly because in the construction industry, after the elimination of relatively backward scaffolding, a large number of new climbing frames have been used,

The advantages of climbing frame are less materials, simple construction, labor saving and efficiency improvement.

With the rise of climbing frame, climbing frame processing equipment also rises. After several years of development, climbing frame processing equipment has become more and more popular recently.

In particular, the climbing frame punching machine may be a relatively late development equipment.

At present, many purchasers do not know the climbing frame punching machine, nor where to purchase it. They can come to Foshan Jinhai Numerical Control Machinery Co., Ltd.

Punching machine manufacturer teaches you how to use Climbing frame punching machine equipment What should we pay attention to?

1. When the punching machine is set with multiple stations, there is generally one oil circuit switch on each oil cylinder, and only one oil circuit switch can be opened at a time,

2. If multiple oil circuit switches are opened at the same time, the pressure will be insufficient and the speed will be slow. This should be noted.

3. After the mold is installed, the punching can be carried out only after the pipe is inserted. The empty punching cannot be carried out without the pipe, which may cause damage to the mold.

4. If you feel that the punching machine is hard to punch, you should timely check whether the blade of the punching needle is passivated,

5. If it is found to be passivated, remove and grind the plunger or replace it with a new one.

6. For hydraulic punching machines, the temperature of hydraulic oil is required by, and generally should be controlled between 30-60 ℃,

7. When the temperature is relatively low, the air transport model should be started for a period of time,

8. In case of long-time operation, the punching machine manufacturer reminds to check whether the oil temperature is overheated,

9. It is important to avoid working all day in hot summer, especially in high temperature at noon.

The above are some precautions during the use of the punching machine. I hope it will be helpful to you. In order to extend the service life of the equipment, you must use the equipment reasonably. The equipment also needs rest. You should pay attention to timely maintenance, so that the working efficiency of the punching machine will not be affected.