We all know that a piece of equipment needs daily standardized operation.

Not only to improve production efficiency, but also to protect equipment.

At present, in the processing and manufacturing industry, enterprises are slowly starting to use Full automatic punching machine For those who just use it, they may not be very familiar with it.

whole Auto punching machine The daily process of is not very complicated, but we also need to pay attention to it. Next, I will make a brief introduction for you.

1、 Fully automatic Punching machine Daily process of:

1. Before starting work, check whether all parts of the equipment, such as parts, are missing, and whether the buttons are out of order,

2. The main reason is to ensure the normal operation of the equipment and avoid secondary injury to the equipment.

3. Secondly, in most cases, the equipment needs to be operated empty during operation,

4. It is mainly to observe whether there are abnormal phenomena. Of course, there should be no miscellaneous personnel interfering with the work.

5. After processing, equipment and tools shall be cleaned and sorted,

6. If the equipment fails, stop working immediately,

7. Contact professional personnel for repair, record the handover of ongoing work, and regularly check and maintain the equipment every month.

2、 Precautions:

1. The drill bit needs regular maintenance. The drill bit will be damaged to some extent after a long working time, affecting the fineness.

2. Empty test shall be conducted before the equipment is used. Judge whether the automatic punching machine has problems by eyes and ears.

3、 Some things about special equipment for hole processing.

1. Before the equipment leaves the factory, the manufacturing enterprise will carry out corresponding inspection and commissioning. After the inspection is correct, add lubricating oil to the equipment and send it to the customer's enterprise.

2. Customers can also check the equipment after receiving it.

3. Workers shall not use gloves when using equipment,

4. Check the power switch, corresponding accessories and parts of the equipment,

5. In case of any abnormality, stop the operation of the equipment first.

6. The equipment cannot be operated under load, which will not only shorten the service life but also damage the corresponding parts of the equipment.