At present, in the processing and manufacturing industry, enterprises are slowly starting to use Climbing frame punching machine For those who just use it, they may not be very familiar with it. Next, share with you about Climbing frame punching machine equipment Some things about.

1. Before the equipment leaves the factory, the manufacturing enterprise will carry out corresponding inspection and commissioning. After the inspection is correct, add lubricating oil to the equipment and send it to the customer's enterprise. Customers can also check the equipment after receiving it.

2. When using the equipment, the staff shall not use gloves. The power switch, corresponding accessories and parts of the equipment shall be checked accordingly. In case of any abnormality, the operation of the equipment shall be stopped first.

3. The equipment cannot be operated under load, which will not only shorten the service life but also damage the corresponding parts of the equipment.

Precautions:

1. The drill bit needs regular maintenance. The drill bit will be damaged to some extent after a long working time, which will affect the precision.

2. The equipment shall be air tested before use. Judge climbing frame by eyes and ears Punching machine Whether there are problems.

We all know that a piece of equipment needs to be operated regularly, not only to improve production efficiency, but also to protect the equipment. The daily process of the operation process of the daily maintenance of the climbing frame punching machine is not very complicated, but it also needs our attention.

Operation process for routine maintenance of climbing frame punching machine:

1. Before starting work, check whether all parts of the equipment, such as parts, are missing and whether the button is out of order, mainly because it can ensure the normal operation of the equipment and avoid secondary injury to the equipment.

2. Secondly, in most cases, the equipment needs to be operated empty during operation, mainly to observe whether there is any abnormal phenomenon. Of course, there should be no miscellaneous personnel to interfere with the work during operation.

3. After processing, the equipment and tools should be cleaned and sorted out. If the equipment fails, the work should be stopped immediately, professional personnel should be contacted for repair, and records should be made for the handover of work. The equipment should be checked and maintained regularly every month.