In daily life Climbing frame punching machine Regular maintenance. Maintenance items vary in frequency. For example, mold position inspection, flywheel conveyor belt inspection, mold table cleaning and other maintenance are frequent. Through scientific maintenance, the service life of automatic punching equipment can be longer and the punching quality can be guaranteed for a long time. Next, we will tell you how to climb the rack Punching machine Maintenance method of.

1. Die fixing screws are fastened

In addition to the regular maintenance items, it is also necessary to fasten the mold and screws of the climbing frame punching machine, that is, use a hexagon wrench to determine the mold screws to make them reach the fixed position; If it is loosened for a long time, it may endanger the punching safety, reduce the punching quality, or increase the hole diameter error.

2. Lubricating and oiling (reduce friction of each part)

The climbing frame punching machine needs to add lubricating oil to each lubricating point every 1-3 months. When refueling, it needs to use an oil gun and add it to the corresponding parts according to the rules; After refueling, pay attention to dust prevention, because the lack of lubricating oil will increase the mechanical friction, reduce the service life of all parts, and may also increase the noise and cause noise pollution.

3. Tighten the V-belt (to avoid sagging or causing danger)

The inspection of the drive V-belt is also CNC punching machine An indispensable maintenance item: open the protective cover and visually observe whether it is loose to see whether it is sagging; In this case, the transmission V-belt should be tightened, but the small editor reminds you that when checking the V-belt, you must be in the shutdown state, otherwise personal safety will be endangered.

The above is the maintenance method of climbing frame punching machine. In addition to the above three important maintenance items, the handle body screws and the punching machine base screws can also be tightened as appropriate to ensure that all parts of the punching machine are free of looseness through visual inspection, hand touch and other forms. In particular, it reminds that the power must be completely cut off before maintenance, and the maintenance procedures of the punching machine must be strictly followed.