Square tube Climbing frame punching machine The emergence of the completely changed the traditional operation mode of manual drilling, which is widely used by many decoration industry projects. It saves both labor and time. The punching speed is four to five times that of the brick hole, and it can be directly punched by adjusting the positioning pin on the mold after calculating the center distance without drawing lines. The punching effect is accurate and beautiful. And it is treated with high-speed die steel, which has strong abrasion force and long service life Etc.

Crawling on square tube Punching machine Before the formal operation, check whether the machine parts are complete, test open the climbing frame punching machine to see whether it can operate normally, and if any parts have problems, replace them with new parts in time to avoid affecting the working process. After checking the equipment, clean the parts to be punched with a clean wet rag to avoid that a large amount of dust flying during punching will stimulate the eyes of construction personnel and pollute other places. This also requires construction personnel to wear a series of protective equipment such as safety goggles and masks before operation, which is a guarantee for workers.

Secondly, in the process of using the square tube climbing frame punching machine, the head of the staff should keep a certain safety distance from the equipment. In case of machine failure, they should not use any objects to detect at will. When punching, they should not put their hands near the machine head, otherwise it is easy to poke their hands. After each use, the square pipe climbing frame punching machine shall be cleaned and cared, and appropriate lubricant shall be added before being put back to the designated position.

At ordinary times, pay more attention to whether the mold is fixed or not. If it is fixed, it should be corrected in time. The mold that has been used for a long time should also be regularly sprayed with rust remover to remove the residue in the grinding wall to ensure that the punching tool is not worn. When using the first-rate square tube climbing frame punching machine, you must be careful and pay attention to it. You must be familiar with the performance characteristics of the equipment before you can operate it skillfully. It is important to ensure the personal safety of all construction personnel while the operation goes smoothly. As long as everyone adheres to the working principles of care and patience, the working efficiency of the square tube climbing frame punching machine can be brought into play.