Full automatic CNC punching machine It is very simple to change the mold; Replacement method of upper mold: use a (black) elastic screwdriver to loosen the upper mold fixing bolt to the left, slowly remove the upper mold, replace the required upper mold, and then use the elastic screwdriver to tighten the upper mold fixing bolt to the right.

Replacement method of lower mold: Use a small hexagonal wrench to loosen the screw fixing the lower mold to the left, and then use fingers or small tools to push out the lower mold from bottom to top from the bottom of the lower mold, replace the lower mold matching the upper mold, and tighten it with a small wrench. Note: The typing side of the lower die is upward, but not downward. When replacing the die, take down the upper die to replace the lower die.

Fully automatic CNC punching machine Advantages: double hole oil circuit, fast oil return speed, can be equipped with solenoid valve foot switch, convenient, fast and practical. The die is made of Cr12 through heat treatment and quenching, which is stamping resistant and has a long service life. The machine body is cut by 45 # original steel wire, and the structure is tight and durable.

Full automatic numerical control Punching machine It is suitable for field operation or mass production in the factory. The punching speed is fast and the positioning is accurate. No noise, no chip, safe and clean operation. It can be customized into punching dies of various shapes, such as long strip and square.