The development of the country has driven the development of real estate, which has led to the development of relevant industrial chains, such as Stainless steel punching machine manufacturer Now it is booming all over the country. The development of door flower equipment factory needs a large number of production equipment, such as door flower equipment. The traditional punch cannot meet the demand for efficiency Hydraulic punching machine Very good to fill this vacancy, hydraulic Punching machine The advantages are small footprint, high speed, low noise, good punching effect, no depression, full hole, half hole and one key tuning, and simple operation. The selection of automatic punching machine feeder must be detailed and accurate, because different industries need different functions and performance to select a good automatic punching machine feeder. For example, for the chassis, the turret mold is complex CNC punching machine It is used to process holes with complex processes such as scribing, reinforcing and bridging.

Use the machine's steps to fill the hydraulic punching machine with 80% hydraulic oil, and then install the electric machine for test. Please pay attention to the no-load (no mold) test, Carefully observe whether the motor reverses (Seen from the fan end, clockwise rotation is positive rotation, if reverse rotation, replace two of the three phases. Install the mold, put the mold into the dovetail slot on the working platform stably, and lock the mold in the dovetail slot with a hexagonal wrench. During the locking process, ensure that the punch can smoothly enter the mold and align the cylinder punch bayonet. After the mold is fixed, fix the punch to the cylinder punch with the distributed screws On.

Correct selection of automatic feeding machine for punching machine: the structure of automatic feeding machine for punching machine depends on the size of the machine tool, the weight of the processed workpiece and other factors, so you must know your own needs in detail before selecting, and select as needed; The size of the main specifications of the punching machine and the automatic feeder shall be compatible with the contour size of the workpiece. That is, small workpieces should be processed by small size machine tools, while large workpieces should be processed by large size machine tools, so as to ensure the rational use of equipment; The power, rigidity and dynamic range of the automatic feeding machine of the punching machine should be compatible with the nature of the process and the appropriate cutting parameters. For example, the CNC punching machine with large power and good rigidity is suitable for rough machining process to remove large blank allowance.

The working precision of the automatic feeding machine of the punching machine is compatible with the processing precision required by the process. Machine tools shall be selected according to the machining accuracy requirements of parts. For rough machining processes with low accuracy requirements, machine tools with low accuracy shall be selected; for finishing processes with high accuracy requirements, machine tools with high accuracy shall be selected; Convenient clamping and simple fixture structure are also options Punching machine equipment It is a factor to be considered. The choice of automatic feeding machine for horizontal punching machine or automatic feeding machine for vertical punching machine will directly affect the structure and processing coordinate system of the selected fixture, and directly affect the difficulty of NC programming and the reliability of NC processing.