Rack punching machine The daily use and maintenance items are as follows:

1. Shelf Punching machine Power off and shut down after use,

2. Then clean the waste materials between the workbench and the mold and grease them.

3. Clean the iron filings on the rack and guide rod, and add lubricating oil for maintenance after cleaning.

4. Replace the gear oil in the punch drive gearbox.

5. Generally, a new machine should be replaced after half a month of continuous operation. In the future, it should be replaced every three months,

6. The gear box lubricating oil is GB 460 gear lubricating oil.

7. The punch shall be milled and replaced regularly, because it is easy to lose punch die if it is not replaced for a long time;

8. It is easy to lead to the disadvantage of the punch, resulting in burr cooling or unsatisfactory punching during the punching process, thus shortening the service life of the punch.