Punching machine It is more and more used in many hardware processing industries, fully automatic Stainless steel punching machine It can completely solve the problem of difficult and slow punching of stainless steel pipe, completely replace the existing bench drill and manual punching, and indirectly solve the serious problem of environmental pollution caused by using bench drill punching. At the same time, it saves a lot of production costs for enterprises and protects the environment. Punching machine is a very practical production tool, which has made a great contribution to improving the efficiency of our industrial production. In fact, punching machine has many nicknames, which we may have heard of at ordinary times, but we do not know what it is. Today we will talk about these nicknames.

Since the punching machine has only been developed for less than 20 years, and it has only been developed for more than 10 years in China, there are still many imperfections,

There is no uniform industry standard, so there are more than a dozen names at present. Generally, it is called punching machine, or CCD punching machine. Many people call it target shooting machine. In Japan, Taiwan and Guangdong, it is called punching machine, perforating machine or eye puncher. Many people call it perforating machine, target punching machine, etc. In fact, it refers to the same product. Punching machines can be divided into manual punching machines, automatic positioning/alignment punching machines Full automatic punching machine , Super Full Auto punching machine Etc. According to the different processing objects, it can be divided into soft plate punching machine and membrane switch punching machine.

Due to the wide application of punching machines, although the same punching machine is produced, the products of different manufacturers have different focus directions. For example, the punching machine produced by Jinhai is used to meet the production needs of various metal processing in the current market.

There may be more than these nicknames of punching machine, but these are common in our daily life, so we only need to master these nicknames. When we hear these nicknames, we will know what they are.

Punching machines are being used more and more in China, and they are developing faster and faster. However, we also need to pay attention to maintenance when we use them, so as to increase their service life.

Daily use and maintenance of punching machine

1、 After use, power off and shut down first, and then clean the waste between the workbench and the mold and grease it.

2、 Clean the iron filings on the rack and guide rod, and add lubricating oil for maintenance after cleaning.

3、 Replace the gear oil in the punch drive gear box. Generally, the new machine should be replaced after half a month of continuous operation. In the future, it should be replaced every three months. The gear box lubricating oil should use the national standard 460 gear lubricating oil.

4、 The punch shall be milled and replaced regularly, because it is easy to lose punch die if it is not replaced for a long time; It is easy to lead to the disadvantage of the punch, resulting in burr cooling or unsatisfactory punching during the punching process, thus shortening the service life of the punch.

The precautions for the use of the punching machine are actually very simple. As long as we pay a little attention at ordinary times, we won't have any problems, and then pay more attention to the use method.