Corner punching machine It is a common punching equipment, which can be used to process corner code and is widely used in the packaging industry.

Corner code is used Punching machine Before processing, parameters need to be set reasonably to ensure punching effect and processing quality.

Here are some considerations:

1. Punching die selection:

Select the appropriate punching die according to the type and specification of the processed corner code.

Different sizes of corner codes require different shapes and sizes of punching dies. Choosing the right die can improve the accuracy and stability of punching.

2. Punching hole diameter setting:

Set the appropriate punching hole diameter according to the actual needs.

The punching hole diameter of the corner code usually needs to match with the used fastener to ensure that the corner code and the fastener can be closely connected.

3. Punching depth setting:

Set the appropriate punching depth according to the processing requirements.

Too shallow punching depth may lead to unclear punching hole, and too deep punching depth may affect the strength and stability of corner code.

4. Punching speed setting:

Reasonable setting of punching speed can improve punching efficiency and quality.

Generally, the appropriate punching speed can be determined according to the test to ensure the processing effect and quality.

5. Punching position setting:

Set the punching position according to the actual needs.

The punching position of the corner code shall match the requirements of the fixing parts to ensure that the corner code can be correctly fixed on the packaging materials.

6. Program debugging settings:

Before setting the parameters of the corner punching machine, it is necessary to debug the program of the punching machine.

Through debugging, it can ensure that all functions of the punching machine are normal and the corner code can be processed normally.

7. Material selection:

The selection of proper materials has an important influence on the punching effect.

The corner code punching machine is generally applicable to packaging materials such as cardboard, and its hardness, stability and other factors should be considered when selecting materials.

8. Cleaning and maintenance:

Regularly clean and maintain the corner punching machine, including cleaning the punching die, lubricating mechanical parts, etc,

In order to maintain its good working condition and improve punching effect and processing quality.

9. Safe operation:

During parameter setting and operation, the operation procedures and safety requirements shall be strictly followed.

Avoid accidents caused by improper operation.

10. Accuracy test:

After setting parameters, precision inspection shall be carried out before punching to ensure that the set parameters can meet the processing requirements.

For punching that requires high precision, it is necessary to calibrate and adjust it regularly.

In a word, the parameter setting of the corner punching machine is an important link that affects the processing effect and quality. Reasonably setting various parameters and strictly following the operation requirements can improve the processing efficiency, ensure the processing quality and extend the service life of the equipment.