Zinc steel guardrail punching machine Common small problems handling
1. Sometimes zinc steel Guardrail punching machine What to do when the punch fails to pull up after punching: check whether the air pressure is sufficient (the normal air pressure needs about 4mpa).
2. How to deal with the frequent pulling of the plastic bag when punching: check whether the air pressure is sufficient; Check whether the punching signal system works; inspect Hydraulic pipe punching machine Whether it is synchronized with the bag making machine cutter.
3. What to do when punching is good or bad (sometimes punching cannot be carried out): check whether the solenoid valve has water and works; Check whether the air cylinder leaks.
Zinc steel guardrail Punching machine Pay attention to some small problems in the process of work. If any abnormality is found, it should be checked and maintained in time to avoid small problems becoming major problems and affecting production efficiency.
