Anti theft net punching machine , easy to understand, faster than the traditional bench drill efficiency, more safe, reliable, practical and wear-resistant! The solid thickness of washable stainless steel pipe is 1mm, which meets the punching requirements of anti-theft net and guardrail production! One day, 350 pipes or 300-500 square meters of anti-theft net can be washed, and various new anti-theft nets can be produced (diamond anti-theft net, plum tube anti-theft net, round tube square tube anti-theft net, door flower, etc.). The U-shaped openings of stair handrails and guardrails can be formed by stamping without any further processing. It is an ideal processing machine for stainless steel producers and pipe dealers.

Mold installation and correction:

(1) Selection and installation of punches and punch nuts: select the corresponding punches and punch nuts according to the required arc, and install the punches in the corresponding punch seats

The bolts fastening the punch, punch nut and punch nut seat shall be loosened and not locked to facilitate calibration; Then turn on the power switch

(2) Left and right correction of punching the bus base: after turning on the power switch, the scene resistant anti-theft net Punching machine Step on the foot switch several times to check whether the punch is in the center of the punch nut. If not

Then adjust the position of the punch holder so that the punch is at the center of the punch holder and tighten the bolts on the left or right side of the punch holder

(3) Installation and correction of punch block: install the punch block in the corresponding punch block, check the upper, lower, front and rear clearance (0.2mm) between the punch block and the punch block, anti-theft net punching machine, if

If the clearance (0.2mm) is inconsistent, adjust the upper and lower positions of the punch block and the front and rear positions of the punch block.

Foshan Jinhai CNC Machinery Co., Ltd. is a 15 year professional R&D, production and sales company CNC punching machine The factory is located in the second industrial zone of Banbaishaqiao, Guidan Road, the main road across the first ring road of Foshan, about two kilometers away from the Foshan Shanxi Station, with good geographical location and convenient transportation. The main products are: CNC punching machine for building climbing frame and ladder, CNC punching machine for stainless steel anti-theft net Zinc steel guardrail punching machine And so on.

The company has gathered a group of people with rich welding experience, mold design Climbing frame punching machine Senior R&D technicians in automation design, and a management team specialized in mechanical assembly, automation control and electromechanical integration. The company's business scope covers all walks of life, including building materials, electromechanical equipment, electrical equipment, household materials, zinc steel Guardrail punching machine , etc. With management as the guide, culture as the cornerstone, quality as the guarantee, and customer interests as the purpose of the business philosophy and operation principle, Jinhai Company has always carefully considered long-term planning to expand the market in an all-round way, common ideas, and common development, so that we can share the joy of creation and prosperity.