It works automatically after startup, and returns to the original position automatically after processing; A pair of dies can be used to punch various patterns, and can be simulated and imitated by computer; It can be punched in any part of a small area, and can be used for blanking of complicated small patterns; Two sets of linkage equipment are used to divide a table top into two working areas for simultaneous operation. The standard configuration of processing table top is 1280x790 mm, and the configuration can be changed. It is suitable for punching on all kinds of leather, plastic, PU, EVA, PVC, cloth, paper, shoe materials, car cushion and other materials. The punching and punching radius is 0.5-8mm.

The pneumatic impact force is used as the driving force, and various shapes of cutters are used to make the leather surface smooth after processing. Compared with the laser drilling machine, there is no coking and blackening phenomenon. The design and change of hairstyle pattern is realized by the change of software and punching needle, without changing the mechanical mold; Power frequency; AC 50-60HZ power voltage: 220-240V machine must be reliably grounded; The CNC leather punching machine is a pneumatic working equipment, and the construction period pressure is 5-6kg. One air compressor shall be equipped, and the air compressor shall be drained timely or regularly.

Set CNC punching machine Fix it on the workbench as required, and carefully check the working condition of each part of the punching machine. Check whether there are sundries at the position of the punching machine and the lower mold, and clean them in time. Then apply lubricant at the top contact position.

Place the workpiece to be punched according to the positioning requirements, and then finish the drilling. Clean the iron chipping and take it out after drilling. Repeat the previous step to continue drilling for the next workpiece to be drilled (and so on). During the actual working process of the numerical control punching machine, the oil storage tank of the punching machine shall be kept free of oil at any time to provide lubrication and cooling for the executing parts of the punching machine. It should be CNC after work Punching machine Clean the garbage, keep it clean and store it dry.