In modern industrial production, Rack punching machine It is a frequently used equipment for processing materials, and it uses modern high-tech technology. It is not only easy to operate but also many times more efficient than traditional equipment, so it is popular. Any staff with rich experience also needs to check the instructions, because every shelf Punching machine There may be subtle differences. You should understand them first and then operate them in the correct way. Rack punching machine manufacturer It is emphasized that the clutch, in particular, should be checked in advance to see if there is any lubricating oil. If necessary, it should be added at any time. It is not allowed to run without oil. At the same time, the clutch cannot reverse itself, or serious accidents will be caused.

When the rack punching machine tool is open for operation, people should keep a certain distance from it. They should not touch the working area of the slider with their hands or any part of their body, including placing the workpiece by hand. Because it is very dangerous, they should use special tools to take and place the workpiece. And shelves Puncher manufacturer It is emphasized that it is necessary to confirm that the machine tool is in a static state before entering the sliding block working area, so as to avoid disability accidents.

Before starting the machine tool, it is necessary to check whether the station layout is proper. The rack punching machine manufacturer said that if there are sundries in the relevant parts of the workbench, they should be cleaned in time to ensure that the machine can be started only when there are no problems. And because the operation of the machine tool has always been a repetitive simple movement, which seems rather boring and boring, and may cause fatigue and even make people a little irritable, so the staff should try to avoid fatigue during overtime work. The manufacturer of commonly used shelf punching machines recommends that the work should not exceed eight hours at a time.

The above are the main aspects included in the safe operation procedures for rack punching machines. In addition, relevant staff must wear protective equipment according to the standard requirements, and cannot drink four hours before entering the workshop. They should enter the workshop in good condition to work to ensure safety issues. Quality assurance The manufacturer of the rack punching machine said that if the machine tool found a problem, it should be repaired by special maintenance personnel, not self operated.