Only right Rack punching machine Only careful maintenance can make it work efficiently. The daily maintenance includes keeping the shelves Punching machine The surface is clean and the body is kept free of sundries. If the machine is out of service for a long time, the surface should be wiped clean and coated with anti rust oil. The sliding block shall also be filled with lubricating oil frequently to keep the surface of the column clean. The working oil should be replaced regularly. It is better to change it once a year and the time for a change should not exceed three months.
When starting the rack punching machine, always observe whether there is any displacement or abnormal noise, and if any problem is found, solve it in time before working. At the same time, check whether the pneumatic part of the rack punching machine can be clamped and separated flexibly, and ensure that the pneumatic effect can be drawn freely. Ensure that the air nozzle will not leak, and confirm that the transmission, connection, lubrication and other parts of the rack punching machine, as well as the protective safety device are normal.
Keep the working environment safe, clean and tidy; During the operation of the rack punching machine, the operator shall strictly follow the correct steps and put the operation safety at an important position. At the end of the shelf punching machine, the power supply shall be cut off immediately, and the machine tool shall be wiped and the working environment shall be cleaned in time. The key to the long-term operation of the rack punching machine is to insist on doing a good job of inspection and maintenance.