Space requirements Stainless steel punching machine It can process multiple surfaces after the workpiece is installed at one time, so it is required that the fixture can meet the requirements that all tools can approach all the machining surfaces in space. In addition, the supporting plate of the fixture moves, supports, sinks and rotates, so the fixture should not interfere with the machine tool in any way.

Rapid readjustment requirements CNC punching machine The processing object can be changed by quickly changing the processing program. In order to reduce the auxiliary time for changing tooling and the waiting idle time for valuable equipment, the fixture is required to have the function of rapid readjustment or replacement of positioning clamping elements when changing the processing workpiece. In addition, the processing time of a single piece increases due to the multi surface processing in NC processing. At this time, if the fixture is designed to be able to replace the workpiece outside the working area of the machine tool, the production efficiency can be improved.

Positioning requirements Zinc steel guardrail punching machine The workpiece shall be fully positioned in the fixture, and the base fluid of the workpiece shall be strictly positioned relative to the machine tool origin, so as to meet the requirements of relative movement between the workpiece and the tool in the machine tool coordinate system. At the same time, the fixture should also be fully positioned on the machine tool, and each positioning surface on the fixture should have accurate coordinate dimensions relative to the machine tool origin to meet the requirements of positioning and installation in NC processing.

Precision requirements due to stainless steel Punching machine It has the characteristics of continuous multi profile automatic processing, so the requirements for the stainless steel punching machine fixture are higher in precision and rigidity than the general machine tool fixture, which can reduce the positioning error, clamping error and deformation error in rough machining of the workpiece in the fixture.