Talking about the method of debugging and correcting the punching machine for zinc steel guardrail!
2022-12-08
The debugging and calibration methods of the zinc steel fence punching machine are as follows: 1. In the measured scale, when the center of gravity of the pendulum is at a low point, the top of the piercing head should be within 5mm of the horizontal taxi passing through the pendulum's rotating shaft. 2. Otherwise, it is necessary to lift and balance the weight. 3. Remove the weight on the pendulum and the sample splint, adjust the pointer to the maximum value, 4. Place the pendulum at the starting test position, and press the release button
Learn more+
