Stainless steel pipe punching machine How to prolong service life

Stamping Machinery Equipment Factory mainly produces stainless steel pipes Punching machine 、 Zinc steel guardrail punching machine 、 Square and round pipe punching machine 、 Piercing machine for stair handrail , High speed Hydraulic pipe punching machine These machines need frequent maintenance to extend the service life and punching precision quality of stainless steel pipe punching machines and other punching machines.

Ensure that the punch is wet for a long time; Add high-quality lubricant without color and moisture; The compressed air must be dry and the solenoid valve must not be flooded; To guarantee Pipe punching machine Life Do not punch the pipe punching machine with hard objects. Before use, check that there is no foreign matter between the punch and the lower die; If the pipe punching machine is not used for a long time, it should be stored in a dry place and the punch should be kept wet.

Troubleshooting of stainless steel pipe punching machine

When punching machine, the punch cannot be pulled up after punching down: check whether the air pressure is sufficient (normal air pressure needs about 4mpa).

The punching machine often breaks the plastic bag: check whether the air pressure is sufficient; Check whether the punching signal system works; Check whether the hydraulic pipe punching machine and bag making machine are synchronized;

Punching is sometimes good or bad (sometimes it cannot be punched down): check whether the solenoid valve has water ingress and works; Check whether the air cylinder leaks.