because Stainless steel climbing frame punching machine The advantages of high machining precision, high effect and simple operation make Punching machine More and more popular in the domestic hardware processing industry, many processing enterprises gradually use automatic or semi automatic Automatic punching machine equipment To replace the previous manual punching machine or punch, especially for punching and punching stainless steel products such as guardrails, anti-theft nets, shelves, etc. Although the stainless steel punching machine has many advantages, after a long time of punching, it is inevitable that problems or failures will occur. Today, Jinhaihai has sorted out Stainless steel pipe punching machine The causes of three types of common equipment failures and how to deal with them correctly.

First, the hydraulic oil pipe of the punching machine is faulty. The temperature of hydraulic oil also has certain limits, too high or too low will cause adverse effects, and the normal temperature is suitable. stay When the temperature is relatively low, the machine should be started for air transportation for a period of time. If the machine is operated for a long time, pay attention to check whether the oil temperature is overheated. Pay attention to the hot summer, do not operate all day, especially avoid the high temperature time at noon.

Second, the punching machine sensor is faulty. stainless steel Climbing frame punching machine If the voltage is unstable, each circuit of the equipment will be unstable. When the equipment displays a fault code, you can first check whether the voltage of the punching machine is normal.

Third, the electronic valve of the punching machine is faulty. If the solenoid valve connector is loose or the connector falls off, the solenoid valve cannot be energized, which causes the solenoid valve coil to be burned. The solenoid valve wiring can be removed and measured with a multimeter. If there is an open circuit, it means the solenoid valve coil is burned out, and it is necessary to find a manufacturer or accessory supplier to replace the machine solenoid valve.

The above three categories are the three common equipment failures of stainless steel climbing frame punching machine in daily use. The operator can check according to the above conditions when facing such faults Punching machine equipment 。 In addition, when the punching machine equipment stops working, regular maintenance is also required for these equipment. In addition, processing enterprises can also train punching machine operators on knowledge and principles, enhance their ability to solve common failures, and quickly determine and solve the causes of mechanical failures when they encounter problems in the later stage.